NDI Inspector • Ultrasonic • Composites & Metals

Pretty in pink.
Serious about the scan.

I'm Jannet — an NDI inspector who finds what you can't see. Cracks, voids, delamination, disbonds, and thickness loss in composite and metallic aircraft structures, checked with precision and a little edge.

Ultrasonic Testing (UT)Bonded CompositesMetallic StructuresNeon scan energy ✦@JannetScanIt
she scans it ✓

The lens is the inspection. The waveform inside is the ultrasonic signal — if there's a flaw, she'll find the echo.

no flaw gets past her

What I Scan

Nondestructive inspection means finding damage without tearing the part apart. If it's bonded, laminated, composite, or metallic — I check what's happening underneath the surface.

01

Ultrasonic Inspection

Sound waves in, echoes back. I provide ultrasonic inspection of both composite and metallic aircraft structures — reading the signal to spot cracks, voids, and thickness loss you can't see with your eyes.

02

Bonded Composites & Metals

Disbonds, delamination, and hidden impact damage in bonded composites, plus cracks, voids, and thickness loss in metals — evaluated layer by layer, in both materials.

03

Signal Interpretation

Frequency, penetration, attenuation, sensitivity, resolution — translating the waveform into a clear call: pass, monitor, or repair.

How an Inspection Goes

Simple, thorough, no shortcuts.

01 — Prep

Review the part, the procedure, and what we're looking for.

02 — Calibrate

Set up the equipment and verify sensitivity on a reference standard.

03 — Scan

Systematic coverage, watching every echo. Jannet scans it — all of it.

04 — Call It

Document findings clearly so the next person knows exactly what was found.

On the Job — Edwards AFB

Real inspection work with the 412th Test Wing Maintenance Group at Edwards Air Force Base — supporting the B-52 inspection effort, May 6, 2025. Composite and metallic structures, checked hands-on.

Jannet Diaz holding a centrifuge tube with oil for magnetic particle inspections, wearing a face shield and pink gloves at Edwards AFB
Magnetic particle prep

Jannet holding a centrifuge with oil for magnetic particle inspections.

✦ U.S. Air Force photo by Daniel Kelley
DVIDS Photo ID 9039388 • VIRIN 250506-F-OM838-1032 • Public domain
Jannet Diaz scanning a cylindrical metal component with a handheld NDT device, wearing pink gloves at Edwards AFB
Scanning metal, pink gloves on

Jannet scanning a cylindrical metal component with a handheld NDT device.

✦ U.S. Air Force photo by Daniel Kelley
DVIDS Photo ID 9039387 • VIRIN 250506-F-OM838-1024 • Public domain
Jannet Diaz inspecting and cleaning a large metal structural component on a workbench at Edwards AFB
Large structural component

Jannet inspecting and cleaning a large metal structural component, layer by layer.

✦ U.S. Air Force photo by Daniel Kelley
DVIDS Photo ID 9039384 • VIRIN 250506-F-OM838-1011 • Public domain
Jannet Diaz examining optical and scientific inspection equipment up close at Edwards AFB
Close-up on the equipment

Jannet examining optical / scientific equipment — eyes on the detail, every time.

✦ U.S. Air Force photo by Daniel Kelley
DVIDS Photo ID 9039389 • VIRIN 250506-F-OM838-1037 • Public domain
Source: “NDI Team Accelerates B-52 Inspection, Ensures Flight Readiness” — DVIDS, U.S. Air Force, 412th Test Wing Maintenance Group, Edwards AFB, May 6, 2025. All four photos are marked PUBLIC DOMAIN on DVIDS.
Jannet, NDI inspector, in clear blush glasses and a grey jacket with a moon-and-stars lanyard, in a workshop with a yellow crane behind her
Jannet — NDI Inspector “I don't guess. I scan, I read the signal, and I know.” SCAN • INSPECT • CLEAR

Inspector energy, girly edge

Jannet is an NDI inspector who shows up polished and leaves with proof. Trained in NDI of bonded composite and metallic structures and ultrasonic evaluation of both, she inspects composite and metallic aircraft structures for cracks, voids, delamination, disbonds, and thickness loss. She brings the same standard every time: calibrate right, scan completely, and never wave through a signal she doesn't trust.

Follow along for inspection life, study notes, and behind-the-scan moments — or get in touch about an inspection through jannetinspects.com.

FPADS: Frequency • Penetration • Attenuation • Divergence • Sensitivity

Think there's something
under the surface?

Reach out for ultrasonic inspection of composite and metallic structures — bonded composites and metals — or follow along for inspection life and behind-the-scan moments.

@JannetScanIt